- Home /
- 1/2" Mur-lok Polyethylene RO Tubing
Best on the market By John on 5/11/2014John would recommend this product to a friendI bought some more to add to the already provided amount that came with the BRS Media Reactor. Excellent product that is quick and easy to install as it can be used as a factory replacement or addition to any RO unit or any other item on your tank that you may need it for!
Best quality By MAREK on 6/5/2013MAREK would recommend this product to a friendI'm always using Mur-lok Polyethylene RO Tubing from BRS. Best quality on the market. Never failed.
Great looking By oscar on 5/3/2013oscar would recommend this product to a friendVery sturdy yet flexible and blends in really well
Rigit and easy to use By Christian on 3/21/2013Christian would recommend this product to a friendI bought 6' for my tank's reactor. Easy to cut, and install. Looks really clean!
Pipe Easy to Work With By Kevin on 2/18/2013Kevin would recommend this product to a friendPipe and murlock fittings are easy to work with. Just cut and push. No glueing and u can disconnect the pipe later on.
Great Product By dgil71 on 7/10/2012dgil71 would recommend this product to a friendVery easy to install and reliable
Great tubing By Kelly on 1/31/2011Kelly would recommend this product to a friendOrdered this so I could extend where my reactor was placed. Works great with their fittings. Easy to cut and install. No drips.
Great! By jimmy on 12/1/2010jimmy would recommend this product to a friendI had to place my media reactor in a new place under my tank and the my tubing was just too short. BRS had the solution. I can now place the reactor anywhere and the discharge can reach any part of my sump.
There are no videos related to this product.
Ask a Question About '1/2" Mur-lok Polyethylene RO Tubing'
Previously Asked Questions
by Dwayne on November 24, 2013, @2:35 PM
Is this $.50 a foot? I need 30 feet so I ordered 30 quantity. Is this correct?
Bulk Reef Supply Hi Dwayne,
That is correct!
by Chris on June 21, 2014, @12:57 PM
What type of fitting / adaptor do I need to buy to go from my PVC manifold which will be 1/2" PVC to the tubing for the BRS reactors?
Bulk Reef Supply Hi Chris,
You would want to adapt your tubing to 1/2" female NPT threads. From there you can get a 1/2" male NPT x 1/2" push connect fitting for the reactor tubing. Sku 100003 at the link below :-)
by Matt on December 15, 2013, @5:54 PM
Is this the same tubing that comes with all the brs rodi units?
Bulk Reef Supply Hey Matt,
The RO/DI units comes with the 1/4" tubing which can be found right here:
The Mur-lok LLDPE Tubing is NSF 58 Component Certified. The products were put through rigorous structural and material testing to help ensure they meet the standards for drinking water. This certification also ensures that our Mur-lok tubing can be easily incorporated into any NSF certified drinking water system with minimal paperwork and minimal, if any, re-testing.
Deal of the Day!
BRS 6 Stage Chloramines DELUXE Replacement Filter KitEnds in
Regular Price: $57.99
Special Price: $50.9900:00:00:00
- Bulk Media & Additives
- Bulk Reverse Osmosis Filters & Systems
- Bulk Dry Live Rock & Live Sand
- BRS Additives
- hw Wiegandt
- Korallen-Zucht Additives
- Red Sea Additives
- Two Little Fishies
- Fauna Marin Aquarium Additives
- Auto Top Off Systems
- Filter Media
- Fish & Coral Foods
- Fragging Supplies
- Heaters & Chillers
- Aquarium Lighting
- Medications & Pest Removal
- Monitors & Controllers
- Protein Skimmers
- Pumps & Plumbing
- Sumps, Tanks & Refugiums
- Tank Maintenance & Salt Mix
- UV & Ozone
- New Products
- BRS Apparel
Send us your feedback
Let us know.
Phone Hours: 7am - 7pm CST M-Th
10am-4pm CST Friday
6325 Sandburg Road, Suite 400
Golden Valley, MN 55427 Map
View Larger Map 6325 Sandburg Road, Suite 400, Golden Valley, MN 55427