Works By Martin on 12/6/13Martin would recommend this product to a friendThis auto top off works for me. the only think I found odd is that when I replug it in after a water change, it starts up for about 30 seconds even though the sensor is submerged. I just hold a cup under the outlet for that 30 seconds to collect the extra water. After the initial plug in it works fine.
Solid Product By Jim on 11/19/13Jim would recommend this product to a friendThis is my 1st ATO system I purchased. It really makes life so much easier. No more filling sump everyday and my salinity stays constant. I hooked it up with a 10 gallon ATO tank from Advanced Acrylics and it works great. Very well built. The only complaint is the pump is a little loud but not a huge deal.
Great Product By Troy on 10/30/13Troy would recommend this product to a friendI have only used a couple of ATO systems and this is far superior to others. It's well worth the extra money. My previous ATO used dual float switches that would calcify or be affected by turbulence in the sump. This is spot on every time. I have a larger system 300 gallons so the pump being able to run for an extended amount of time is great. I also like that the pump will automatically turn itself off after a certain amount of time as another added precaution
Great Quality! By Jorge on 9/8/13Jorge would recommend this product to a friendI have to say that this system has made my life much better! I don't have to worry about adding fresh RO/DI water every other day due to evaporation, it keeps my water at the perfect level and creates a much more stable environment for my fish.
The system was incredibly easy to install and it works perfectly. This will be the only top off system I will use on future tanks.
If you need a top off system... buy this unit and don't compromise on anything else!
Great Reliable Product By Ryan on 8/26/13Ryan would recommend this product to a friendBest ATO in my opinion, very accurate and simple to set up. The initial set up was easy but had a little trouble with bubbles covering the optical sensor causing it to overflow and make the float valve go off. I turned it off and let it sit in the water for a few hours, then plugged it in and has worked ever since.
A little spend, but a crucial part of the aquarium
A good product that could use a little refining. By Matt on 8/15/13Matt would recommend this product to a friendOverall I found this product easy to set up and install. Once properly set up, this has kept the water levels in my sump very stable.
I do have a couple of small complaints though:
1) I wish the instructions had come right out and said to place the primary sensor in an area of the sump with NO, and I mean NO, air bubbles rather than telling you that in the trouble shooting section.
2) A better mounting system for the controller. A couple of stick on pieces of Velcro? A simple mounting bracket or even molded screw holes would be better.
3) The LED indicators are unshielded and impossible to read unless you are looking at the controller straight on.
Honestly, where is the much hyped "German quality and attention to detail?" For $200+, I would think Tunze could do better.
Best ATO money can buy By Joe on 8/13/13Joe would recommend this product to a friendGreat product. Exceed expectations. Even though it's a little pricey but it does come with the pump so that make it reasonable. Very acurrate and trustworthy. I expect it to work a long time.
Quality product By Sal on 7/21/13Sal would recommend this product to a friendThis was very fun and simple to install. It works flawlessly.
Reliable and effective By Andrew on 7/20/13Andrew would recommend this product to a friendI have had this running a few months on my 80 gallon reef. The unit was relatively easy to set up, the instructions are just poorly laid out. Once set up there were no issues and it has been keeping my water level consistent.
Well worth the price!!!!!!!!!!! By jhmeresqu on 7/8/13jhmeresqu would recommend this product to a friendI utilized it as my ATO for my RO/DI water return to sump system to replace evaporated water. Works great , love the fact that it has the Sensor Eye and the backup float switch. Can't get enough redundancy. A little pricey but well worth it.
Great investment By Mpek on 6/30/13Mpek would recommend this product to a friendAll I have to say is that this system makes my life a lot easier! As long as I keep my ATO container full it runs flawlessly. I would recommend this to anyone.
Not bad By Shalashaska on 6/29/13Shalashaska would recommend this product to a friendI've had it so far for 3 days. The set up was easy. I dident have to use the instructions what so ever. The only thing I found so far that is a issue is that micro-bubbles from my protein skimmer like to settle on the optical eye, thus giving a false water low indication. I just moved it to a better location, problem solved.
Ask a Question About 'Tunze Osmolator Universal 3155 Auto Top Off'
Previously Asked Questions
by BILL on November 13, 2013, @7:37 AM
what pump do you suggest to go with the3155 osmolator?
Bulk Reef Supply Hey Bill,
The Osmolator actually comes with the pump right in the package so you don't need to buy one!
by Jeff on November 28, 2013, @2:50 PM
How much head will the pump push
Bulk Reef Supply Hey Jeff,
The pump on the osmolator has a max head height of 7ft.
Deal of the Day!
BRS 2 Part Calcium & Alkalinity Total Package - BulkEnds in00:00:00:00
- Bulk Media & Additives
- Bulk Reverse Osmosis Filters & Systems
- Bulk Dry Live Rock & Live Sand
- BRS Additives
- Red Sea Additives
- Korallen-Zucht Additives
- Two Little Fishies
- Fauna Marin Aquarium Additives
- Auto Top Off Systems
- Filter Media
- Fish & Coral Foods
- Fragging Supplies
- Heaters & Chillers
- Medications & Pest Removal
- Monitors & Controllers
- Protein Skimmers
- Sumps, Tanks & Refugiums
- Tank Maintenance & Salt Mix
- UV & Ozone
- Videos & Books
- New Products
Send us your feedback
Let us know.
Hours: 9am - 5pm CST M – F
6325 Sandburg Road, Suite 400
Golden Valley, MN 55427 Map
View Larger Map 6325 Sandburg Road, Suite 400, Golden Valley, MN 55427