Ask a question
The max head pressure on the included pump is about 7ft. It likely wouldn't be well suited to this application. That said though, you can get the additional switch socket adapter which would allow you to control any pump via the osmolator system. That way you can use a pump that can handle the head pressure.
In theory it could present a problem but the circuitry in the Osmolator should help to prevent that. Every time the ATO is triggered it runs for a minimum of 15 seconds. It adds overfill to prevent short cycling. In most cases this should be sufficient unless the height of your waves is constantly changing.
The pump on the osmolator has a max head height of 7ft.
Head pressure is the maximum height that the pump can push water vertically. If your tank is higher than the Head height listed this will not be able to work. Feel free to let us know if you have any further questions!
This will work great in the back of a nuvo 30! Feel free to let us know if you have any further questions!
The diameter of the pump is just under 2" this is how wide the cap will need to be in order to allow the pump to pass through.
This will be 4" long, 2.5" wide and 1" thick. it will require a Velcro pad to stick or to be used with double sided tape.
The optical eye sensor will usually sense and fill within the range of 1/4" Feel free to let us know if you have any further questions!
If you have calibrated the pump to maximum output and it is still unable to keep up you will want to ensure the pump is filling the proper amount. It may be that the head height (the vertical height the pump has to push the water) could be too high or other pump related problems. We have used the osmolator on larger systems with quite heavy evaporation with great luck. If the issues continue you will want to contact Tunze directly to see if the pump is working correctly! I have included their contact information below!
Tunze – 512-833-7546 firstname.lastname@example.org
The Tunze Osmolator is an entirely self sufficient system. It is perfectly fine to connect the Osmolator to one of the Apex's power outlets incase you wanted to cut the power for some reason (like when you are doing a water change) though the Apex isn't capable of reading the Osmolator's sensors or anything of that sort.
The 3155 will have 2 sensors the mechanical float and the optical eye. The 3152 will only come with the mechanical float switch. Feel free to let us know if you have any further questions!
The max head pressure on the osmolator pump is 7ft.
This osmolator will run for typically 10-15 minutes in a dry container. eventually the controller will sense that it has not filled in a timely manner and should turn the system off. if this continues to not be filled there may be red flashing on the controller. For direct assistance you will want to contact Tunze directly!
The Osmolator actually comes with the pump right in the package so you don't need to buy one!
Just wondering if I need 2 ATO. I know you can place it either in the sump or in the tank, but my question is if I place it in the sump will it also refill my tank in that process. I don't see that happening but if it does please let me know.
If you have a sump, it MUST go in the sump, in the chamber where your return pump is. This is the only area of your tank that will have a changing water level depending on evaporation (unless its far too late!). Only one ATO would be necessary but it must go in that location if you have a sump.
We run into very few issues with these but after that length of time I would imagine its possible for any component to fail. We don't have individual parts like the optical eye, but if you give Roger and company a shout over at Tunze USA, he might. At the very least he could likely help you narrow down exactly what it is. The number I have for them is 512-833-7546 email@example.com
That is correct. Its a submersible pump that gets stuck right into the top off water. If your interested in this ATO system you should give this blog article a quick read. It goes into a lot more detail on the system (which is one of my favorites).
The Tunze Osmolator 3155 is one of the safest ATO’s available. It utilizes an electronic eye sensor to monitor water levels and a backup float switch sensor with an optional audible alarm. The controller protects the quiet metering pump from running dry and reports an empty storage tank. Two magnetic holders for sensors and multiple mounting brackets included as well as a pump.
LED indicator lights the Osmolator will allow you to visually see if their are any issues with your top off system.
Two technologies of water level monitoring, and built in safety back-ups.
The optical eye sensor will keep the water level very steady to keep the salinity from fluctuating in your aquarium. The Osmolator does work well with kalkwasser.
Max Head Height: 7.2 ft
Note: With any pump, kalkwasser can cause premature wear. New pumps are available at a very reasonable price.
Good, but you would expect more from a German made product. By Michael on 12/2/2016Michael would recommend this product to a friendWhen I received the boxes at the door and opened them I was five stars for sure. As I was putting it together the hose for the Osmolator won't fit in the hole made in the Clear 5 Ga Trigger ATO container. OK, four stars (they should of coordinated thier product with some of the most popular ATO containers). I had to drill out, ouch, my laser cut hole with a drillbit stupid me, it chipped my brand-new ATO container. I should've just switched out the supplied hose with a standard sized one that I have, it must be because the German product is metric. Then pushing the hose into their own supply pump was really a pain. Once again the hose was too big or it's a very, very tight fit (please BRS, a warning on the fitment issue or a hose that will fit the hole and the pump would be nice). OK, three stars. Then in trying to mount the hose to the Ruby Trigger sump their own mounting bracket clip that they use is too small for the hose once again and the plastic screw in the hose holder is too big for the plastic clip. So outcomes the drill once more, luckily this time I didn't break anything. Should be down to two stars now but this is the best ATO on the market. OK, three stars. I hope I don't have any of the other problems in the other reviews that should be the most reliable and safety back up system there is. I've been running it for about an hour now.
Worked until it didn't work By Tim on 11/17/2016Tim wouldn't recommend this product to a friendWorked great for two weeks... now it is acting weird and not dispensing water. I have to manually unplug and plug it back it to get it to start working. It appears to be signalling the pump to start it every couple seconds. I can hear it inside my 5 gallon container. On then off constantly. Pump just kind of jerks on and off in water container.
could be better for the $$ we pay. By Deva on 11/2/2016Deva wouldn't recommend this product to a friendOK I got this ATO for my 90 reef. 1st think i noticed was the pump was crazy loud like the sound of airplane wings during landing. so I got a replacement for BRS same thing. tank is in my room and the pump wakes me up all the time.
next is that it its so sensitive ( a good thing) but it tunes on and off a few times a min. ( maybe that could be a fluctuation in my siphon but once again the load pump makes me cringe.
so all that i could live with barley . went on vacation and the power went out ( of course right things always happen when we are on vacation ) the power was off for a few hrs. once back on the ATO did not reset it self. so it failed got a txt from tank setter and had to have her pour water in sump my hand.
so all that said I would not recommend this ATO to many bugs for the price. going to order the micro smart ATO for my nano and see how that works.
I give it 2.5 stars...
Outstanding product By Pedro on 9/29/2016Pedro would recommend this product to a friendIt's been running for over 3 years flawlessly. Great features and very easy to install and use. Mostly set and forget. Don't forget to inspect and clean the little pump and sensors once a year... That is why Tunze name is huge.
one of the great products out there. By poetjim on 9/23/2016poetjim would recommend this product to a friendI have been using this auto fill for over a year and it has been great, i have found that the five gallon bucket that I keep under my 60 gal. max c tank has to be cleaned a couple of times a year and that:s it, i;m getting ready to get another one for my wife:s 25 gal.coral tank.
Other options less expensive and similar reliabillity....... By Jason on 9/12/2016Jason wouldn't recommend this product to a friendI bought the Tunze Osmolator even though it was the most expensive ATO because I wanted to get the most reliable unit I could. Unfortunately over the last 4 months I've had continual problems with the unit. After the initial installation it would start and fill up to the optical sensor, but then a few minutes later kick back on and continue filling up to the back-up float switch. I run Kalkwasser in my ATO so that was pretty concerning.
After removing, cleaning and reinstalling the unit seemed to function ok for a couple weeks but not it kick's on the first time it's plugged in but stops after 15-20 seconds and never starts again. I've tried cleaning, repositioning the sensor etc. but no improvement.
Just buy the JBJ and keep the float switches clean on a regular basis.
Great idea just willl not function as promised By Joesreeftank on 9/4/2016Joesreeftank wouldn't recommend this product to a friendI have had this for about 18 months, I loved a raved about it at first, Problem I have had is the pump will stop shot. Tunze has sent me about 4 new pumps. They all do the same. pump will only run about 15 seconds. the controller says pump is on but its not on. I paid 200 for this system so I really wanted it to work, I am going to cut my losses now because as you all know this ATO is critical part of keeping my reef tank stable
Quit after less than 2 weeks By BC on 7/8/2016BC wouldn't recommend this product to a friendAfter a loss of power,short term and yes it was on a surge power bar,Checked all aquarium,allOK.Wife comes in 1/2 hour latter says an alarm is buzzing.Checked it out sump high level ;luckily float stopped pump.So much for Tunze as Best ATO.
Easy top off By Will on 6/20/2016Will would recommend this product to a friendI bought a 5 gallon tank next to my sump. Threw this in the tank with my RO/DI water and worked instantly. Very convenient, easy to use, accurate.
Awesome product By Steven on 6/13/2016Steven would recommend this product to a friendThe Tunze Osmolator was a great purchase. I used to have to fill my sump manually every day. This allowed me to to focus more of my time on other areas of the system. I have it plugged into my Apex controller and programmed to shut of during feed mode to keep the alarm from going off. Also have the Apex to shut it down if the salinity in my take drops. Even without the Apex this would be a "must need" purchase.
replacement By tubby on 6/7/2016tubby would recommend this product to a friendI been using this ato since i started the hobby back in 2014. Well the ato finally died on me, i was looking around for a new ato - wasn't really impressed with anything else out there. Figured i already had the experience with the tunze ato, why switch when i already know how this product already performs. Highly recommend.
Great ato. Works as advertised. Pump fits in 5 gal jug By Chris on 5/17/2016Chris would recommend this product to a friendThis top off works really well. The only thing to remember is to prime the pump but after that it runs like a champ.