jQuery UI Accordion - Default functionality

75 GPD Reverse Osmosis Membrane - Dow Filmtec

75 GPD Reverse Osmosis Membrane - Dow Filmtec
Click on image to zoom
View full size image

More Views

  • 75 GPD Reverse Osmosis Membrane - Dow Filmtec
  • 75 GPD Reverse Osmosis Membrane - Dow Filmtec Label
  • 75 GPD Reverse Osmosis Membrane - Dow Filmtec Left Side
  • 75 GPD Reverse Osmosis Membrane - Dow Filmtec Right Side

75 GPD Reverse Osmosis Membrane - Dow Filmtec

99% Recommend this to a friend (68 of 69)

SKU: 200051
Please wait...
Orders over
Ship Free
Reward points What's this?
Ships tomorrow

Quick Overview

75 GPD MEMBRANE (98% REJECTION RATE) Hands down the best membrane for our hobby.

Compatible with all RO systems. Be sure to change the flow restrictor if you change the flow of your membrane.


Related Products

Ask a question

Please Sign up or Login to ask a question

Previously Asked Questions

  • by Linh on October 25, 2013, @3:56 PM

    I have purchased a 75g 5stage plus rodi 6mths ago and wanted to know how long should the membrane and di resin last. From the first time I used it my tds coming in to the di chamber starts around 120 for afew minutes then gets down to 10. Comes out to 0 going out of the di chamber. Does this sound about right or do I need to change the membrane. I've change the sediment filter also. Thanks.

    Bulk Reef Supply Hi Linh,
    That sounds pretty typical. It is higher at first because of tds creep and will lower as it runs. Non-exhausted DI resin should give you 0 TDS coming out. The membrane itself will typically last 3-5 years, sometimes even much longer. DI resin doesn't really have a "normal" as it is completely dependent on your source water. Monitor the TDS and when it begins to go above 0 then it is time to change the resin. We use a color changing DI resin so this should also coincide with the resin turning from a dark blue/black color to a gold/yellow color.

    Do you find this question helpful?  Yes   No

  • by Dong on May 2, 2014, @11:35 AM

    How long (as in how soon)do we need to change the filter inside on the membrane?

    Bulk Reef Supply Hi Dong,
    The membranes last quite a long time, typically 3-5 years though if you treat them well (vigilant on changing your pre-filters on time, etc) they can last even longer.

    Do you find this question helpful?  Yes   No

  • by Miles on April 1, 2014, @4:47 PM

    Can this work with Corallife products, such as the pure flo-II?

    Bulk Reef Supply Hi Miles,
    Membranes are a standard size so they will fit in any unit. Just make sure that if you change the speed of the membrane you also change the size of your flow restrictor to match.

    Do you find this question helpful?  Yes   No

  • by Tom Syswerda on May 6, 2014, @7:53 AM

    I have this 75gmd membrane in in my unit and keep it at 50 psi coming in. My city water psi is 80. I was told that if I were to open the valve up (incoming water to the 80 psi instead of the 50psi I am regulating now that I would get more efficientcy? Should I keep that water at 50 psi or 80psi? Going into the rodi unit.Thanks

    Bulk Reef Supply Hi Tom,
    The unit can handle up to 80psi without issue and it does perform better at higher water pressure. I would go ahead and run it at the 80psi, there isn't any reason not to and performance will only go up.

    Do you find this question helpful?  Yes   No

  • by BJ on September 4, 2013, @5:12 PM

    What were to happen if you put a membrane at a different rate than the unit is mark at? For example, putting this 75gpd into a 50gpd RODI unit or putting a 90gpd membrane into a 75gpd unit? They all seem like the same plastic enclosures. Does the membrane just really dictate the GPD output?

    Bulk Reef Supply Hey BJ,
    If you change the size of the membrane without changing the flow restrictor to the proper size your unit will have the incorrect amount of waste water. It will either have too little water which would damage the membrane or too much water, which is just a waste of water (and could decrease pressure). The housings for the membranes themselves are universal. The membrane is what changes the output, though there are some other factors such as water pressure and temperature that do as well.

    Do you find this question helpful?  Yes   No

Full Details

75 GPD MEMBRANE (98% REJECTION RATE) Hands down the best membrane for our hobby.


Compatible with all RO systems


FILMTEC reverse osmosis membrane elements for home drinking water are the industry's most reliable. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. FILMTEC elements are shipped dry for convenient handling and long shelf-life. These elements are NSF/ANSI Standard 58 listed. Equipment suppliers can take advantage of FilmTec's Standard 58 listing and participation in the NSF Data Transfer Protocol to reduce costs for reduction claims for their systems.

  • Rated at 50 psi
  • Will purify about 20% more water than competitive elements rated at 60 psi


1. Permeate flow and salt rejection based on the following test conditions: 250 ppm softened tap water, 77°F (25°C), 50 psi (3.4 bar), and 15% recovery.
2. Permeate flow rates for individual elements may vary +/-20%.



Items 1 to 12 of 69 total

  1. 1
  2. /
  3. 2
  4. /
  5. 3
  6. /
  7. 4
  8. /
  9. 5
  10. 6
  • Easy replacement Great Part Great Service By Jack on 3/9/2015

    Easy replacement Great Part Great Service
  • Does the job, easy to install By Mr. Microscope on 1/26/2015

    After three years with my RODI unit doing the job, I decided it was time for a refresh on the RO membrane (in addition to my yearly update on the rest of the unit (filter, carbon blocks, DI resin)). I received my RO membrane and was like, "...uh, what now?" I quickly found this article from BRS explaining every aspect of replacing the unit with all sorts of tips for getting the job done.
    Just a few minutes later, I had it installed and was running water though it. Thanks for the write-up BRS! Great product.
  • Best membranes on the market By chromiumlux on 1/19/2015

    I have used these membranes from day one and will continue to use them.
  • CLEAN WATER By Mark on 1/14/2015

    wasn't sure this would fit since i had got my rodi unit at another site. Well if DID and the new membrane i feel works even better, was easy to change, and a great value and allowed me to order other items at once from same site.....bulk reef supply is really a one stop shop for reef keeping..
  • Excellent fit and finish By Sympley on 1/13/2015

    So far so good. I was going through DI cartridges at a rate of 1 per week. It was time to replace the membrane. This one seems very well build and good quality.
  • Price! By Tim on 1/8/2015

    My local store charges almost 3 times as much as BRS. BRS has great service, great price!
  • Great product better customer service By Thomas on 12/30/2014

    Called with a question about my ro unit and BRS got me exactly what Ineeded. Great price and easy to change out.
  • Works perfect By Ryan on 12/10/2014

    My TDS is 0, RO membrane from last year is still working strong and I know my water was filthy because the city recently did work on the piping and had an outbreak of algae. Their response was to bomb the city system with enough chlorine and chloramines to kill a horse. That being said, the fish never knew! Highly recommend these membranes, they last.
  • Good quality product By Tony on 12/7/2014

    This is a good quality product that is very easy to replace. I would not hesitate to recommend to others.
  • great membrane By matt on 11/12/2014

    This is the second one I've purchased from BRS. Brought my tds right back down to 3,so after it goes through the di chamber the tds is zero. Can't go wrong with using this membrane.
  • Quick and easy By Keith on 11/7/2014

    Very simple to swap.
  • Works Like A CHAMP By JCulmo on 8/8/2014

    First of all anyone concerned about the compatibility of this membrane with a Coral Life II 24GPD system, don’t be. This 75 GPD membrane fits perfectly with no problems to speak of. Make sure if you are upgrading the output (in my case 24 GPD to 75 GPD) membrane, be sure to get the matching flow restrictor and put the restrictor on the waste side of the membrane (in my case it is the red waste water side). It took be all of about 10 minutes to install and upgrade, of which 5 minutes was spent trying to get the old membrane out LOLOLOL. If you are considering this upgrade, just do it. The price is the best out there and of course, it comes with the best service and prices that we all love BRS for.

Write Your Own Review

You're reviewing: 75 GPD Reverse Osmosis Membrane - Dow Filmtec