1/4" Aquatec 8800 Booster Pump Kit

Click on image to zoom
View full size image

More Views

  • RO/DI Booster Pumps

1/4" Aquatec 8800 Booster Pump Kit

99% Recommend this to a friend (121 of 122)

SKU: 200216
Please wait...
Orders over
Ship Free
Reward points What's this?
Ships Monday

Quick Overview

Everything you need to install an Aquatec 8800 Booster Pump - all in one kit. It also includes the pressure switch so it will work with reverse osmosis units that are set-up to shut off automatically. ¼” Push Connect fittings.

Benefits of maintaining higher water pressures

  • Improved waste water ratio

  • Improved membrane rejection performance

  • Reduced DI resin consumption


Related Products

Ask a question

Please Sign up or Login to ask a question

Previously Asked Questions

No questions have been asked yet.

Full Details

The Aquatec 8800 Booster Pump Kit Includes and Features:

  • Aquatec 8800 Booster Pump
  • Aquatec transformer
  • Aquatec PSW pressure switch
  • ¼” push connect fittings
  • Patented "flex-mount" base plate which significantly dampens vibrations and reduces noise
  • Adjustable pump pressure
  • Adjustable shut-off pressure point



  • Well worth the cost, if you have lower pressure By Ram on 1/27/2015

    My Spectrapure CSPDI 90 gal system was running at about 45 PSI for the longest time. A gallon of water would take more or less 30 minutes to filter through... not cutting it! I added this booster pump and have never looked back. Essentially doubled my pressure and cut the time to produce a gallon in half.
    Operation is relatively quiet and setup really couldn't be any easier. Highly recommend you just buy this thing.
  • Works great, but it is loud By Ken on 1/22/2015

    My home water pressure was 48 PSI and after I installed this booster it was at 98. I now run a 150 GPD RO system with no problems. I can however hear this pump running from my basement as a dull hum throughout the 1st floor of the house.
  • Does the job, but super noisy! By Warren on 1/16/2015

    This thing vibrates my entire house's plumbing. It is awfully unpleasant. One of my least favorite purchases from BRS. I'm going to try a Gold Series Shurflo instead. My entire family complains about this pump. We can hear it all the way from the basement to the top floor. The pump itself isn't that noisy, but it has some sort of pressurized wave effect on the plumbing.
  • Good product By Big C on 1/10/2015

    My pressure was only 35psi but when I hooked up pump it jumped to 90 psi. Easy to plumb n pretty quiet too. Highly recommended if u have low pressure or use the water saver option.
  • Worth it By David on 12/22/2014

    Made my RO unit complete and gave me enough power to get the water I need. Simple hookup and operation.
  • super upgrade By Strych2 on 12/13/2014

    Fantastic, well worth the buck! I have a 4 stage unit that was putting out less than 40 psi. Because of low water pressure filling my tank was a slow and argues process. This unit took my system up to 95 psi. I can produce water quickly the DAY of my water change!
  • super quiet By Michael on 12/13/2014

    Kit is very easy to hookup, took less than 15 minutes and very very quiet. with this kit I'm not making water twice if not three times faster. Well worth the buy.
  • Must Have By Cap on 12/11/2014

    Great pump, went from 55 psi to 80 on 5 stage, with auto shut off, di resin use is down also, very happy, no noise, very quiet.
  • Just Plain works great By Ryan on 11/30/2014

    I had low water pressure issues when I first installed my RO system so i ordered the booster pump kit and it completely took care of my problem and has worked with no problems what so ever since I installed it. Another great product
  • Booster pump By Joe on 11/5/2014

    This pump is great. Easy to set up and helps lower my TDS due the the increase in pressure I guess. Also makes my Water twice as fast as before. Thanks BRS
  • would recommend By shdw2001h on 10/27/2014

    Easy to set up. when from 50 psi to over 80 psi. cut the time to fill my drum up from 5 hours to about 2-3 hours. Also it is very quiet.
  • Doubled my PSI By jeffrey on 9/20/2014

    Just installed this on my RO/DI unit and my before PSI was 40 PSI and with this pump kit I am getting just above 80 PSI. I also installed my RO/DI unit inside a cabinet since I have mine outside under a deck. If you dont you will eventually get green algae problems in it. Keep it dark ;-) Have to order a bracket to be able to install another 10" canister for my DI resin so I do not yet know how the pump will effect the DI depletion. It seem to use DI resin fast when I had only 40 PSI. More to follow

Write Your Own Review

You're reviewing: 1/4" Aquatec 8800 Booster Pump Kit