1/4" Aquatec 8800 Booster Pump Kit

Aquatec 8800 Booster Pump Kit 1/4"
Click on image to zoom
View full size image

More Views

  • Aquatec 8800 Booster Pump Kit 1/4"
  • RO/DI Booster Pumps
  • Aquatec 8800 Booster Pump Kit 1/4" Top View
  • Aquatec 8800 Booster Pump Kit 1/4" Connections
  • Aquatec 8800 Booster Pump Kit 1/4" Side View

1/4" Aquatec 8800 Booster Pump Kit

99% Recommend this to a friend (152 of 153)

SKU: 200216
$149.99
Please wait...
OR

Orders over $75

Ship Free

$4.99 Flat-Rate Shipping

What's this?

Ships today
order in
13h 29m

Quick Overview

Why does BRS recommend this?


If you hook up your RODI system and have low pressure or an issue with the amount of product water you are producing, there is a good chance are a booster pump will solve the issue.  The Booster pump kit will come with everything needed to get it hooked up to your RODI system and increases the pressure feeding the system in a matter of minutes.


Everything you need to install an Aquatec 8800 Booster Pump - all in one kit. It also includes the pressure switch so it will work with reverse osmosis units that are set-up to shut off automatically. ¼” Push Connect fittings.


Benefits of maintaining higher water pressures



  • Improved waste water ratio

  • Improved membrane rejection performance

  • Reduced DI resin consumption

More

Related Products

Ask a question

Product Questions

Does the 8800 booster pump kit come with tubing?
Question by: Paul on Jan 17, 2014 12:08:00 PM
Hi Paul,
It does not, but the pump installs inline with your existing feed line so in most cases no extra tubing is necessary assuming your system is already plumbed from the water source to the RO/DI unit.
Answer by: Bulk Reef Supply on Jan 17, 2014 12:08:00 PM
how much more pressure will i get , i dont want to get to much an blow things up .....i have 150 GPD working on 55 to 60 psi....... an i now i need 65 psi for this 150 GPD ro 5 stage ......
Question by: rocky on Feb 22, 2014 4:24:00 PM
Hi Rocky,
The pressure will depend on your incoming water parameters but 20psi would be pretty typical. No worries about going too far though, the pump itself has a pressure bypass on top that will allow you to turn it down if its too high.
Answer by: Bulk Reef Supply on Feb 22, 2014 4:24:00 PM
Is there a option for the 3/8 pump in the complete kit also? If so, same price?
Question by: Shaun on Jul 31, 2014 4:14:00 PM
Hi Shaun,
Currently only the 1/4" booster pump is available in kit form. We carry the 3/8" pump as a replacement pump for folks that already have a system, though you could buy a power supply and pressure switch to make your own 'kit".
Answer by: Bulk Reef Supply on Jul 31, 2014 4:14:00 PM

Full Details

The Aquatec 8800 Booster Pump Kit Includes and Features:

  • Aquatec 8800 Booster Pump
  • Aquatec transformer
  • Aquatec PSW pressure switch
  • ¼” push connect fittings
  • Patented "flex-mount" base plate which significantly dampens vibrations and reduces noise
  • Adjustable pump pressure
  • Adjustable shut-off pressure point

Videos

Reviews

Items 1 to 12 of 153 total

  1. 1
  2. /
  3. 2
  4. /
  5. 3
  6. /
  7. 4
  8. /
  9. 5
  10. ...
  11. 13
  • Must have! By Steve on 1/29/2016

    This thing's the ticket! Installed in about 10 minutes. My pressure was running borderline before the pump. Now I'm at full throttle and producing twice as much water from my RODI. Cashed in some BRS points and saved some cash, delivered free in a few days. I'm a happy camper! Thanks BRS! You guys rock!
  • Easy to set up...works great By Joshua on 1/11/2016

    I moved and found that I only had 40 PSI in my new home. I ordered this pump with the kit and it works great. I watched the BRS video for setup and it was simple. Great product and easy setup!
  • Low pressure fix By Jason on 1/1/2016

    Great to have when you don't have pressure. Perfect combo with the RO/DI. Love that it comes preset and is a plug and play upgrade. Runs almost silent.
  • Return on Investment! By Jason on 12/20/2015

    Just moved house and started to setup again. I was quiet disappointed with the water pressure at only 45psi. (If only I had know in advance, not sure I would have agreed to buy the house :) ) I decided to add the Aquatec Booster pump kit along with the 150GPD Upgrade Kit. This pump took my water pressure up to 90psi! Love it and with a 180Gal build in progress, this pump along with the RODI Upgrade kit will save me on my water bill in the long run!
  • GREAT addition By Larry on 12/14/2015

    I recently upgraded my RO/DI system with the BRS 150g upgrade, but only had 45psi. I was burning through DI resin FASSST, so I decided to add the Aquatec Booster pump kit. Solved all my problems - took my water pressure from 45psi to 80psi. Output went from a few drips to a steady stream and my DI resin is lasting much longer now. If you are on the fence like I was --- DO IT! - well worth the $.
  • Needed this! By Jared Scott on 12/11/2015

    I had a puny 35# of pressure before adding this to my RO/DI system and has boosted it up to 95#! I have the 150 gallon a day 4 stage WWS+ system and it's increased the output of finished water 3 fold.
  • A Must have if you have low presure By Xavier on 11/21/2015

    Awesome pump and its very easy to adjust to the desire pressure.
  • Just what I needed By Randy on 11/20/2015

    I moved and my water pressure was at 45 psi. Not at all what you would call ideal for efficient operation of a RODI filter system. I installed the pump paired with a float valve in my 55 gal reservoir in my garage and now my pressure is at 90 PSI, TDS is zero, and my can is always full.
  • Should have bought a long time ago!!!! By Alan from South Bend on 9/28/2015

    First off, love this pump! Living in the city, water pressure was only 30 psi, after I installed this, shoot up to over 90. Had manually turn it down a bit, to 70-80 psi. What use to take all day to fill up my 35 gallon container, now is filled up a quarter of the time. The other big thing I noticed is, total TDS coming off the membrane dropped from 14 to 7!!!. Great reduction for consuming my DI resin. Paired with my 5 stage BRS RODI, this was simple and very easy to install, I would highly recommend it to anyone that needs a boost in their pressure. Can not speak highly enough about BRS!!
  • Perfect Fix For Slow Pressure! By Jeffrey on 9/7/2015

    My psi was at 45 and after adding this pump it shot up to 85. Not that loud, small footprint and instead of a trickle of water, I'm now getting a steady stream. Takes 1/4 of the time to fill my brute container. LOVE IT!
  • I need to stop doubting brs products By Walter on 9/5/2015

    I must confess, I seem to doubt too easily when I have an iffy situation, a sort of "you are guilty until proven innocent" Complex. But too many times have brs products proven me wrong. This pump is awesome! I had 34 psi when flushing the ro membrane and 39 psi when actually producing ro/di water on my 4 stage brs rodi unit. This booster kit upped my psi to 80 when flushing my membrane and 90 psi when producing ro/di water. Nice and quiet, and no leaks at these pressures! Thanks brs for another amazing product!
  • Doubled my pressure By TitaniumDevil on 8/31/2015

    I recently upgraded to a 150 gpd on my RODI, my pressure was at 40 psi, needless to say I could not achieve 0 TDS after the DI resin and the waste water was still the same as not having the second membrane. Once I connected the pump the results were surprising, the pressure jumped from 40 to 90 psi, my TDS before the DI resin was at 3 TDS and product water came out at 0. The waste water now is 1 to 1 with the product which was my second main goal, 0 TDS being the first

Write Your Own Review

You're reviewing: 1/4" Aquatec 8800 Booster Pump Kit