- Home /
- Dual Inline TDS Meter DM-1 - HM Digital
Great tool By June2881 on 10/16/2014June2881 would recommend this product to a friendI did not have a tds meter installed to my RODI system when first starting out with my reef tank. After 4-5 months of excellent water parameters I suddenly had a huge phosphate spike. After realizing the problem was my RODI filters expiring I added this meter and never looked back. Excellent and very important tool.
Usefull TDS Meter By Mark on 9/29/2014Mark would recommend this product to a friendI have this meter testing the water coming out of my membrane as well as the water coming out of my DI resin. It is very accurate and helpful. When the time comes where it need to be calibrated, the price point is good enough to purchase another.
Helps to take the guess work out By Travis on 8/19/2014Travis would recommend this product to a friendVery easy to install and even move around if you are wondering what each area is doing. Changed mine over to the discharge side just to see what flushing does and I will tell you that it is a good idea to flush your RO before and after each use it does help. I only have about 190 TDS going in but while I'm flushing I have seen over 400 TDS coming out. This is a must have for anyone with an RO/DI unit.
Good product By emdrn05 on 5/19/2014emdrn05 would recommend this product to a friendI'm only giving this a 4 because the directions for installing it were lacking. Once I got it hooked up it seems to be working well. Definitely need to have one on your filter.
Must have By Eric on 5/8/2014Eric would recommend this product to a friendYou need this. Takes the guesswork out of filter replacement. Really simple to install and operate. Very nice for the price.
Great product By Richard on 4/20/2014Richard would recommend this product to a friendEasy to install, gives a simple quick way to monitor your filter performance.
How Can You Not Have One By Austin on 4/19/2014Austin would recommend this product to a friendhow do you know what your system is doing are you at 0 TDS? the dual meter tells you what is going in to your DI canister and what is coming out. No more Hoping my RO/DI unit is working right.
Must have item on RO/DI system By Rick on 4/18/2014Rick would recommend this product to a friendThis meter is a great addition to any system. Much easier then a pen type checker. To have confidence in the water going into your tank you need to know if the filter is running as it should be. With this you will know in seconds.
Why didn't I have one when I started!? By TriggerThis on 4/13/2014TriggerThis would recommend this product to a friendA must have!
I didn't have one, almost crashed my tank putting 30TDS top off water in it every day because I didn't know my DI was exhauseted.
Don't have to worry any more
Literally takes 6 seconds to install
WORKS WELL UNTIL CALIBRATION IS NEEDED By NONE on 4/10/2014NONE would recommend this product to a friendGOOD LUCK CALIBRATING FOR THE AVERAGE JOE. AT THIS POINT IMO IT BECOMES DISPOSABLE. FOR THE PRICE AND GETTING SEVERAL YEARS USE IT IS WHAT IT IS.
put a few on your rodi system By Chicago on 3/25/2014Chicago would recommend this product to a friendI love these things. I use two of them on my system. Use for
1. supply water going in
2. water after the pre filters and after carbon
3. after the reverse membrane but beofre the di cartridges
4 last one after the di cartridges to let me know how the final water is.
so easy and great to monitor.
This works really well By Bob on 3/3/2014Bob would recommend this product to a friendHooked this up to my older RO unit and was able to see how well the membrane is performing. Its especially amazing to see the difference between the input and output.
Pressure gauges, flush kits and TDS meters are eas ...
This video demonstrates the different TDS meters a ...
The DM-1 Dual Inline TDS Meter from HM Digital is one of the most important reverse osmosis accessories. This tool monitors the TDS of your reverse osmosis system in two places and lets you know exactly how the system is performing.
BulkReefSupply.com suggests installing the dual TDS meter post membrane and post DI stage. These two readings will notify you when it's time to change the RO membrane and DI resin. This unit features a digital display and comes with two 1/4" John Guest Quick Connect Tee's. As with all HM-Digital products, the DM-1 comes factory calibrated.
Deal of the Day!
Fauna Marin dKH (Alkalinity) Test Kit RefillEnds in
Regular Price: $17.99
Special Price: $12.5900:00:00:00
- Bulk Media & Additives
- Bulk Reverse Osmosis Filters & Systems
- Bulk Dry Live Rock & Live Sand
- Auto Top Off Systems
- Calcium, Alkalinity & Trace Elements
- Controllers, Monitors & Testing
- Filter Media
- Fish & Coral Foods
- Fragging Supplies
- Heaters & Chillers
- Pumps & Plumbing
- Salt Mix & Tank Maintenance
Skimmers & Reactors
- Internal Protein Skimmers
- External Protein Skimmers
- Hang On Skimmers
- Ozone Equipment
- Nano Skimmers & Accessories
- UV Sterilizers
- Sumps, Tanks & Refugiums
- Specials, New & BRS Gear
Send us your feedback
Let us know.
Phone Hours: 7am - 7pm CST M-Th
10am-4pm CST Friday
6325 Sandburg Road, Suite 400
Golden Valley, MN 55427 Map
View Larger Map 6325 Sandburg Road, Suite 400, Golden Valley, MN 55427