-
Drill Press Attachment for Hand Drills
$39.99 -
Bulkhead ABS Thread x Thread
Starting at: $4.49
-
Bulkhead Schedule 80 Thread x Thread
Starting at: $10.99
-
Diamond Coated Glass Drill Bits
Starting at: $8.99
-
DID THE JOB By Adam on 3/20/13
Adam would recommend this product to a friendI needed a 2 1/2 inch hole saw for installing the 1 1/2 uniseal so I went to the hardware store and found that the 2 1/2 hole saw alone was $13. I was ordering other items from Bulk Reef so I added this to my cart due to the value. I used it to cut hole into a heavy duty garbage can for water storage and it worked great. -
Awesome for the price By Travis on 3/16/13
Travis would recommend this product to a friendI was about to buy one drill bit at the local hardware store and it was going to cost about 1/4 of what this did. This however comes with a complete set. Drilled through the wood I needed it to with no problems. Well worth the money even if you don't have any aquarium related use for it. -
Quality in a little box By Bosley on 3/15/13
Bosley would recommend this product to a friendI use these hole saws for all kinds of projects many not even reef related. quality and durable recommend this kit ,has everything you need. -
Good for the price By Eric on 8/11/12
Eric would recommend this product to a friendThe blades come in a nice toolbox and the work well. A lot more economical than going to the hardware store to get them. -
BEST price on hole saw! Lots of sizes! By Andy on 8/25/11
Andy would recommend this product to a friendThese are the best value I have found on a very complete set or hole saws. These hole saws has made my live 100 times much easier. Allows you to drill with or without drill bit quide. Good Quality! I will buy another set just because they are such great values! -
Worked Like a Charm By Tim on 8/24/11
Tim would recommend this product to a friendI had to drill my acrylic tanc for a closed loop system. My first attempt at drilling a tank and was quiet nervous. Kept the bit wet as I drilled (recomend) , and the bits worked like a charm -
Drilling tanks easy By EricM on 11/30/10
EricM would recommend this product to a friendI bought this kit to drill overflows and returns for a custom acrylic frag tank and a custom sump and after that i used this on a custom acrylic clownfish broodstock tank and in the future i will be drilling a cusstom 20 cube.
i was gonna buy the induvidual blades from Lowes, but for $20 for each hole size i needed was way to much too pay. this kit is inexpensive and it works great. I used it to drill 2 x 1.5" drains in the 3/8" bottom of my tank and the 1/2" sides. and it made a perfect hole. it didnt burn the acrylic as i went slow. it was a perfect hole and it has so many different sizes to choose from. I also used this to re-drill a drain hole cause the person who made my breeding tank only drilled the drains for 3/4" and the returns were only 1/2". i was dreading to re-drill the holes bigger, but the hole saw bit quickly into the acrylic and made a perfect hole every time. i had to do this 4 times and each new and bigger hole was perfect. same with re-drilling the 1/2" hole to 3/4". this kit is worth its weight in gold. i even passed it around in my local reef club and everyone who used it, loved it. -
Great value By paul on 10/11/10
paul would recommend this product to a friendI purchased this kit to make several uni seal holes in my plastic water storage containers. They work like a charm. The ultra fine teeth don't grab like most hole saws after the pilot hole has been made. The kit was confidence inspiring enough that I also used the kit to make a drain hole in one of my acrylic sumps as well. Just go slow enough that you are not melting the material you are drilling through.
There are no videos related to this product.
Ask a Question About '16 Piece Hole Saw Drill Bit Set '
Previously Asked Questions
No questions have been asked yet.
Hole saw sizes included in this set:
3/4"/ 19mm, 1"/25mm, 1-1/8"/28.5mm, 1-1/4"/32mm, 1-1/2"/38mm, 1-3/4"/44mm, 2"/51mm, 2-1/2"/64mm, 3"/76mm, 3-1/2"/89mm, 4"/102mm, 5"/127mm
Drill Bit Size |
||||||||
| Uniseal Size | 1.25"/32mm | 1.75"/44mm | 2.5"/64mm | 3"/76mm | ||||
|---|---|---|---|---|---|---|---|---|
| 1/2" Uniseal | x | - | - | - | ||||
| 3/4" Uniseal | x | - | - | - | ||||
| 1" Uniseal | - | x | ||||||
| 1.5" Uniseal | - | - | x | - | ||||
| 2" Uniseal | - | - | - | x | ||||
-
Deal of the Day!
BRS Bulk Premium ROX 0.8 Aquarium Carbon
Ends in00:00:00:00
-
FREE PRIZE$
-
Bulk Media & Additives
-
Bulk Reverse Osmosis Filters & Systems
-
Bulk Dry Live Rock & Live Sand
-
Aquarium Additives
-
Auto Top Off Systems
-
Filter Media
-
Fish & Coral Foods
-
Fragging Supplies
-
Heaters & Chillers
-
Lighting
-
Medications & Pest Removal
-
Monitors & Controllers
-
Plumbing
-
Protein Skimmers
-
Pumps
-
Reactors
-
Sumps, Tanks & Refugiums
-
Tank Maintenance & Salt Mix
-
Testing
-
UV & Ozone
-
Videos & Books
-
Specials
-
Clearance
-
New Products
Company Info
Phone: 763-432-9691
Fax: 763-546-1720
Hours: 9am -5pm CST M – F
Email: support@bulkreefsupply.com
672 Mendelssohn Ave N, MN 55427 Map
