- Home /
- Kessil A360 Neptune Apex Control Cable
Must have to control Kessil A360 By Mark on 3/18/14Mark would recommend this product to a friendAllows separate control of both intensity and color. I did have to buy a coupler and add an extra cable with rj45 connectors as the 6' length was too short to reach my Apex base unit.
Works Great By Kristoffer on 3/4/14Kristoffer would recommend this product to a friendConnected to of the kessil A350W-E's together then connected them to my Neptune apex Jr. Product works great and is exactly as described.
Good Cable By STEVEN on 2/6/14STEVEN would recommend this product to a friendyou will need this cable to control your kessil a360 with an apex controller. it works as described, i too wish it was longer and that it came with a right angle adapter.
Great cable By TremontReefer on 1/14/14TremontReefer would recommend this product to a friendUsed to hook my leds to the controller. Worked as desired.
Great Product By Erixreef on 12/21/13Erixreef would recommend this product to a friendI needed this to control my new Kessil
A360WE Lights. Great service and fast
Shipping as expected from BRS.
High quality cable By Jim on 11/19/13Jim would recommend this product to a friendVery nice cable that works perfectly. Only thing I didn't like was the length. Could be a little longer.
There are no videos related to this product.
Ask a Question About 'Kessil A360 Neptune Apex Control Cable'
Previously Asked Questions
by James on January 1, 2014, @1:54 AM
Is the VDM module required for this to plug into or does it plug directly into the base unit?
Bulk Reef Supply Hi James,
It depends on what Apex you have. The standard Apex has VDM ports built right in. If you have either the Apex Lite or the Apex Jr. then you will need the VDM module.
by Shawn on January 15, 2014, @8:26 AM
Do you need two of these cables if you want your APEX to control two lights? Or do you buy the daisy chain cable and one of these?
Bulk Reef Supply If you want each light to be controlled separately, then you would need two cables. If you want each light following the same schedule you can control the first light via the Apex and then daisy chain the second light to the first.
by Ryan on March 10, 2014, @4:31 AM
What control unit do you need to plug these into the apex on do you need the VDM unit for the apex to use this cable from a kessil to these?
Bulk Reef Supply Hi Ryan,
These interface between the Kessil A360 and the Neptune VDM ports. You don't necessarily need to have a VDM module as the standard Apex system has two VDM ports built right into it. If you don't have the standard Apex or are already using the two VDM ports then you would need an additional VDM module.
Use the Kessil A360 Neptune Apex Control Cable to connect your Kessil 360 (A360N/360W) LED lights to your Neptune Systems Apex controller.
- Type 1 - compatible with Neptune Systems Apex controllers
- Length: 6 Ft. (1800mm) without connectors
- Color: Black
- One End: 1/8" (3.5mm) stereo male phono plug
- Other End: RJ45 plug
- Kessil Part Number: KA360C1
Deal of the Day!
BRS Bulk Soda Ash (Sodium Carbonate) Aquarium SupplementEnds in00:00:00:00
- Bulk Media & Additives
- Bulk Reverse Osmosis Filters & Systems
- Bulk Dry Live Rock & Live Sand
- BRS Additives
- Red Sea Additives
- Korallen-Zucht Additives
- Two Little Fishies
- Fauna Marin Aquarium Additives
- Auto Top Off Systems
- Filter Media
- Fish & Coral Foods
- Fragging Supplies
- Heaters & Chillers
- Aquarium Lighting
- Medications & Pest Removal
- Monitors & Controllers
- Protein Skimmers
- Sumps, Tanks & Refugiums
- Tank Maintenance & Salt Mix
- UV & Ozone
- Videos & Books
- New Products
Send us your feedback
Let us know.
Phone Hours: 7am - 7pm CST M-Th
10am-4pm CST Friday
6325 Sandburg Road, Suite 400
Golden Valley, MN 55427 Map
View Larger Map 6325 Sandburg Road, Suite 400, Golden Valley, MN 55427