- Home /
- Monitors & Controllers /
- Neptune Systems /
- Giesemann TESZLA LED Module
-
Giesemann TESZLA LED Aquarium Bracket
Starting at: $69.99
-
Giesemann Wall Bracket
104 Reward Points$104.99 -
Giesemann TESZLA LED Hanging Kit
39 Reward Points$39.99 -
The Reef Aquarium Volume 3: Science, Art and Technology by Julian Sprung and J. Charles Delbeek
79 Reward Points$79.99 As low as: $75.99
-
Sleek and Stylish By Amber on 2/10/13
Amber would recommend this product to a friendI have only had my pendants for 2 days but the quality of the LED's is really great. I like being able to adjust the level of white or blues to provide a variety of looks to my tank.
I have mine about 15" off the surface and running them for 4 hours with 1 hour each sunrise and sunset for a total of 6 hours until my corals adjust.
The instruction booklet could have been a little more detailed but its not impossible to figure out.
-
How To Hang Aquarium Lights from the Wall
In this video we have a quick demo on how to hang ...
More5231 Views
Ask a Question About 'Giesemann TESZLA LED Module'
Previously Asked Questions
-
by sam on May 31, 2013, @2:42 AM
did you have the teszla controller device?
Bulk Reef Supply Hey Sam,
The Teszla lights are controlled by an on-board timer/controller. You basically just press the button in the morning when you want it to turn on, press the button again in the evening when you want it to turn off, and then it will remember those times and repeat them every day. -
by Casey on January 28, 2013, @4:05 PM
Can you create a dawn and dusk lighting manipulation for turning the lights on and off?
Bulk Reef Supply Hey Casey,
The Teszla can do a great simple ramp up and down effect and its actually built into the programming. The programming is super simple and you don't have to hassle with any clocks, etc, because you simple tune the colors that you want, press the enter button at the time of day you want the lights to be on, and then press the enter button again at the end of the day when you want the lights to turn off. It remembers the timing and automatically turns on and off at the same times the following days. It will automatically start the lights off at 0% and slowly ramp them up to the settings you have chosen over the coarse of 30 minutes and do the opposite at lights out. -
by amber on February 9, 2013, @8:12 AM
How far above the water is it recommended for these to hang?
Bulk Reef Supply Hey Amber,
3-4 inches would be typical. The closer they are the more light you get in the tank, the higher you are the more the light spreads out. I wouldn't go closer then 3" though just to keep water from splashing, etc.
TESZLA LED Manufacturer's Manual
Trusted German company, Giesemann introduces the TESZLA LED lighting solution. Sleek, elegant design, aluminum housing and loads of features. Great for smaller tanks.
All German-made including the housing, thermo-elements and electronic boards. Each TESZLA LED is equipped with a micro-controller to monitor the internal operational temperature of the LED unit. The fan then automatically adjusts depending on the heat generation. This ensures proper operation and reduces overheating.
Available in a matte anonized aluminum finish or a shiny white powder coating. Each color features black varnished glass elements.
BulkReefSupply.com also carries the TESZLA Hanging Kit and TESZLA Wall Mounting Brackets.
-
Deal of the Day!
BRS 2 Part Calcium & Alkalinity Total Package with Dosers
Ends in00:00:00:00
-
FREE PRIZE$
-
Bulk Media & Additives
-
Bulk Reverse Osmosis Filters & Systems
-
Bulk Dry Live Rock & Live Sand
-
Aquarium Additives
-
Auto Top Off Systems
-
Filter Media
-
Fish & Coral Foods
-
Fragging Supplies
-
Heaters & Chillers
-
Lighting
-
Medications & Pest Removal
-
Monitors & Controllers
-
Plumbing
-
Protein Skimmers
-
Pumps
-
Reactors
-
Sumps, Tanks & Refugiums
-
Tank Maintenance & Salt Mix
-
Testing
-
UV & Ozone
-
Videos & Books
-
Specials
-
Clearance
-
New Products
Send us your feedback
Let us know.
Company Info
Phone: 763-432-9691
Fax: 763-546-1720
Hours: 9am -5pm CST M – F

Email: support@bulkreefsupply.com
672 Mendelssohn Ave N, MN 55427 Map

