Fun project everything you need included By surfishjoe on 2/13/14surfishjoe would recommend this product to a friendI shopped around and the kit from BRS was better quality and less hassle than trying to piece something locally. Yes i probably could have saved a few bucks but the end result is well worth it. I have a great looking top that was easy to put together with no surprises. One tip- take your time cutting the frame with a hacksaw as the frame is easy to damage. Thanks BRS!
Good product. By Axizo2 on 1/21/14Axizo2 would recommend this product to a friendIf you use the proper tools and follow directions this DIY screen should work just fine. I used You tube videos and was able to put it together fairly quickly. Fits well as a screen and does not effect light shimmer at all.
Great finish for a rimless tank By Richard on 1/21/14Richard would recommend this product to a friendI used this for my Deep Blue 60 cube and it came out great. Don't try to make the screen to tight or it will twist the frame. I made it just smaller than the inside dimensions of the glass and it sits inside so perfectly you can't even tell is there.
works well By Phormium on 12/18/13Phormium would recommend this product to a friendThis is a great product--the frame is easy to cut and put together, tight fit so that it's not flimsy, sits flat and the mesh is also easy to get straight and taut. Depending on the size of your tank, there is lots leftover of the screen and the spline for future changes or repairs which is a nice bonus. Overall somewhat expensive but the results were worth it.
Looks Sharp By Michael on 11/25/13Michael would recommend this product to a friendYes, I am aware that you could probably find all the parts for this kind of build at a hardware store, potentially even for less money. That's not the point of this kit. The point is that you buy a kit that's been tested over other people's tanks that you know works and won't require a single (or subsequent) trip to the hardware store. I used a simple hacksaw and rotary tool to cut and smooth the 3 foot kit to fit my Nuvo 24. It looks great and keeps my temps down in the hot Texas climate.
not worth it By Levi on 8/26/13Levi wouldn't recommend this product to a friendI got the same kit at my local home improvement store for under 10 dollars. This is such a rip off I would hope people aren't seriously paying this much for this junk.
works well/ cost effective By dru on 7/29/13dru would recommend this product to a friendI have a custom sized rectangular tank with wrasses who jump. The top worked perfectly. While not quick to assemble.with frame cutting and inching along to get the screening tight,the final product looked great. I compared pricing for the kit components at a local hardware store and BRS was price competitive.
Got what I expected By mntbighker on 7/22/13mntbighker would recommend this product to a friendI am not a big fan of the frame material but in general this seems to be the only game in town if you want this type of cover with clear screen material. I hope it holds up to the salt environment. The build process is pretty simple, but can be a little finicky to keep the screen tight and the frame square.
Works as advertised! By cmeyer24 on 6/10/13cmeyer24 would recommend this product to a friendExactly what I was looking for, and easy to cut and fit specifically to your tank!
Great kit By Lenny on 5/20/13Lenny would recommend this product to a friendThis kit has everything that you will need. I realize that you could get all the parts at Home Depot but you would have to purchase each item separately and for more money. Now I don't have to worry about my wrasse's jumping out of the tank!
Perfect top By Martin on 5/10/13Martin would recommend this product to a friendeasy to get together and does a nice finish. Definatly getting anoter set when i swap tank.
Great kit By TW on 5/7/13TW would recommend this product to a friendGreat job, BRS! I wish I had known about you all sooner. The kit was very easy to put together, though the 3'x2' dimensions likely mean almost everyone needs to trim this at least a little (probably cost-prohibitive for you to include a throw-away saw, though!). Luckily I have a hacksaw and some medium sandpaper. The assembly looks great and does its job. Thank you!
Ask a Question About 'DIY Aquarium Screen Top Kits - 1/4" Netting'
Previously Asked Questions
by theo on October 31, 2013, @4:08 PM
i have a jbj nano 28 that has a rounded front. is there a way to make this screen with a rounded front.
Bulk Reef Supply Hi Theo,
Unfortunately the frame doesn't bend well. What most folks do is make a square/rectangle shaped screen to cover what they can as its better then nothing.
by Matt on October 21, 2013, @5:52 PM
What is the best way to cut this? If my tank is a 90 gallon (48.5 inches by 18.5 inches), the 4 foot section covers the length, but too much on the width. Suggestions?
Bulk Reef Supply Hey Matt,
A hacksaw works just fine for the screen frame. The netting itself is soft enough to easily be cut by a razor blade.
by Mike on September 12, 2013, @7:35 AM
This may be a stupid question but I have a 55 gallon tank. The dimensions are 48 x 13 x 20. I just need to order the 4 foot kit correct?
Bulk Reef Supply Hey Mike,
You got it. The 4ft kit comes with frame and netting to cover up to a 4ft x 3ft area.
by Jonathan on October 22, 2013, @2:40 PM
I have bought just the screen in the past. I use it to make custom lids for people with acrylic. Is the mesh on its own still available?
Bulk Reef Supply Hey Jonathan,
I think this is what your looking for:
by Scott on October 28, 2013, @8:07 AM
Is the 1/4" spacing of the grid?
How will it affect reef light?
What's the best way to cut the framing pieces to the fit my tank?
Bulk Reef Supply Hi Scott,
Correct, its the grid spacing on the netting. It has a very minimal effect on the amount of light in the tank. The easiest way to cut the framing is with a simple hacksaw.
DIY Aquarium Screen Top Netting Kits Contents
|Width (x2)||Depth (x2)|
|2 Foot||2 Foot||2 Foot||4||6.5' x 2.5' ¼”||x||25'|
|3 Foot||3 Foot||2 Foot||4||6.5' x 2.5' ¼”||x||25'|
|4 Foot||4 Foot||3 Foot||4||6.5' x 6.5' ¼”||x||25'|
|5 Foot||5 Foot||4 Foot||4||6.5' x 6.5' ¼”||x||25'|
|6 Foot||6 Foot||4 Foot||4||6.5' x 6.5' ¼”||x||25'|
- Bulk Media & Additives
- Bulk Reverse Osmosis Filters & Systems
- Bulk Dry Live Rock & Live Sand
- BRS Additives
- Red Sea Additives
- Korallen-Zucht Additives
- Two Little Fishies
- Fauna Marin Aquarium Additives
- Auto Top Off Systems
- Filter Media
- Fish & Coral Foods
- Fragging Supplies
- Heaters & Chillers
- Aquarium Lighting
- Medications & Pest Removal
- Monitors & Controllers
- Protein Skimmers
- Sumps, Tanks & Refugiums
- Tank Maintenance & Salt Mix
- UV & Ozone
- Videos & Books
- New Products
Send us your feedback
Let us know.
Phone Hours: 7am - 7pm CST M-Th
10am-4pm CST Friday
6325 Sandburg Road, Suite 400
Golden Valley, MN 55427 Map
View Larger Map 6325 Sandburg Road, Suite 400, Golden Valley, MN 55427