Ask a question
The pump does not come with them in the box but they are available (and suggested). I have included a link below:
You would want to run it separately from a biopellet reactor. The two medias require different rates of flow and would have negative effects on each other :-)
You certainly can run it in a reactor without issue. Reactors are able to pass more water over the concentrated media and will inherently have better performance. Feel free to let us know if you have any further questions!
the main reason is flow for the tumble. when multiple media are used it certainly will take up room in the chamber, in most cases there is not enough room for a tumble when the canister is taken up with carbon. While this could work on smaller systems 30 gallons and under, larger tanks would need more media and inherently more room to tumble. Feel free to let us know if you have any further questions!
Not a huge problem unless you find the water is not flowing out of the reactor. This can be mixed up and adjusted flow to attempt to correct the flow in the bottom of the GFO. Feel free to let us know if you have any further questions.
this is due to media capacity and flow through the media. While you can change out media more often for best performance and cost efficiency a larger reactor is recommended or a dual to separate the GFO and Carbon. Feel free to let us know if you have any further questions!
The max capacity for the reactor would be a total of 3 cups of media if it doesn't need to tumble (like carbon/gfo mix). If you were actually maxing out the reactor though you might want to consider a larger pump then the standard mj1200.
All of our reactors use 1/2" tubing and fittings, hopefully you have some of that laying around too!
You will want one rector for Carbon and one for GFO on a 150 gallon tank. Feel free to let us know if you have any further questions!
The reactor is a great way to tumble GFO or run carbon (or both together) to keep colors and odors under control and Phosphate levels to a minimum (with GFO). This unit is designed to be used in a sump in most cases and not hang on back. Feel free to let us know if you have any further questions!
Also, do I place both the intake and output hoses of the reactor in the same sump chamber? Or should the outflow go directly into the last chamber with the main return pump?
No need to run carbon in a bag when your using a reactor. The idea isn't to run all of the water through the carbon in each pass (which largely isn't happening now either as you will get things like channeling with a bag). When it comes to which chambers of the sump, most people return to the same chamber as you don't have to worry about creating odd siphoning issues but largely its just a matter of convenience. Your cycling the water from the tank over and over again so its not a big deal :-)
It has a capacity of 2 cups of GFO or 3 cups of carbon. How big of a tank that works for really depends on what specific media you plan to run. What type of GFO or carbon were you planning to use in the reactor?
This will depend on what pump is used. With the Cobal MJ 1200 pump you can expect flow at maximum 200 Gallons per Hour. Feel free to let us know if you have any further questions!
Really just about any pump in the 300gph range will do the trick, the Cobalt MJ1200 just happens to be any easy fit. The only pump I would avoid is the marineland maxijet 1200, as they are quiet loud when used for this purpose.
Do you just sell the tops?
What adapters would I need to facilitate that connection? I know I will need a 1" PVC Y valve, but from there, I need something to knock down 1" PVC to a 1/2 flexible push connector. I can split that Y again for the 2 reactors. Help?
You will want to use a Reducing Bushing 1” Spigot x 1/2” Female Thread and a 1⁄2" Male NPT x 1⁄2" Push Connect to adapt your reactor plumbing to your return line.
I would avoid multiple Y fittings and make a manifold using a T off you main line running to another T for one reactor and then the end of the line going to your second reactor.
I know its difficult to describe so take a look at this to get an idea of what I am going for.
Each output will need a valve as will the line going to your tank. Getting the flow right to each reactor and your display tank can be a little tricky but you should only need to do it once.
Hope this helps!
Have a great day :)
They are just 1/2" push connect elbows. Its possible you may be able to find that at the local hardware store, though 1/2" is a bit larger then they usually come. If not they can be found right here:
It is 1/2" RO tubing. More can be found at the link below. Honestly it wouldn't really be worth it to try and adapt to a different type of tubing as you would basically have to rebuild the whole filter. I would suggest just using a push connect elbow if you need to go around a corner, that way you also won't have any issues with kinking.
If you are going to use them both in the same reactor but not mixed, you would use a sponge pad as a divider. That said though, if you aren't going to mix them you may be better off with a dual reactor which will make it much easier to change the media.
We certainly do, the replacement pads for our reactors can be found here: http://www.bulkreefsupply.com/brs-reactor-replacement-pads-hard-shell.html.
Its not a problem to mount the reactor behind the tank or something to that effect as well. It doesn't hang on back, but so long as you have somewhere to put it, its not problem at all to use it on a tank without a sump.
That shouldn't be a problem at all. The reactor should have enough room to hold the amount of media you need to run with just about any type of GFO or carbon you use on a tank that size.
Changing the media is actually really easy. You just want to make sure that the pump is off and then you unscrew the bottom canister. While you might spill a few drops if your careful almost all of the water will stay in the bottom canister and you can carry the canister media and water to the sink to drain it and replace the media. You can leave the main bracket mounted, the pump in the tank, etc.
The BRS reactor does not hang on the back. Units that hang on the back aren't as common, the phosban reactor is the model most folks will use in that situation. The same cobalt mj1200 is a great pump option for it as well.
The biopellet reactor doesn't have foam pads and it also includes fittings for a larger pump (bigger pump is needed for biopellets) wheras the gfo/carbon reactor only comes with an adapter for the cobalt pumps.
We sure do! You can find them right here:
The BRS GFO & Carbon Reactor features several distinct advantages over other brands.
- Ultra-transparent media cartridge allows for clear viewing of reactor media
- Heavy duty plastic construction
- High quality easy to use double O-Ring push-connect fittings
- Easy to operate, clean and maintain
- Filter wrench included
- (2) 3 Ft. sections of tubing
- High quality ball valve for precise tuning
- Ability to run carbon and GFO at the same time
- Instantly attaches to popular pumps like Maxi-Jets using included push connect fittings
- 1/2" fittings and ports throughout reduce head pressure and provide ample flow rates
- Holds three cups of carbon (Approx. 300g) or two cups of GFO (Approx 290g)
- Dimensions: 14"H x 8.5"W x 5.5"
- Pump (optional) and media sold separately
Clogs By Mike on 1/27/2017Mike wouldn't recommend this product to a friendIts a good concept, but it does clog pretty quickly. For the first week or so you have to monitor the water flow and clean if necessary.
Carbon Reactor By Michael on 1/8/2017Michael wouldn't recommend this product to a friendI needed to mod Reactor it clogs pretty quickly. need to cut the bottom slot plastic for more flow
A simple reactor By Bbdb on 10/30/2016Bbdb would recommend this product to a friendThis reactor includes just about everything you'll need hoses coupling, valve, and of course the reactor. everything included is of great quality, and I didn't think twice about buying from BRS.
Works a lot better than other name brand reactors By Tyler on 10/22/2016Tyler would recommend this product to a friendBeen up and running for two weeks now and I am impressed. Had other "popular" reactors that began to leak after 1 year. Only advice is to ensure you cut the tubing straight and ensure it is pushed all the way in. I also had a leak from the elbows as well after the initial install which was alleviated after I cut the tubing straight and pushed the tubing in as far as it would go!
Great Product By Kiefer on 10/6/2016Kiefer would recommend this product to a friendHigh Quility, Bult Strong Awsome delievery
Good Product By Bill on 9/9/2016Bill would recommend this product to a friendI first purchased the Deluxe version of this reactor and it works very well. I opted to save a few bucks this time around and wasn't disappointed. The cap is a little more sturdy in the deluxe version but this has plenty of strength and I'm not worried about anything breaking. It's easy to use and change out filter media. If you're looking for a GFO reactor, carbon or both, this is a good buy.
reactor By bill on 8/21/2016bill wouldn't recommend this product to a friendi bought two they work great, i would have giving it a five but one of the 90 fittings leak's at the swivel. my stops when pointed down.
Works great By Gary on 7/1/2016Gary would recommend this product to a friendRunning GFO & Carbon, seems to be working great.
functions great. By Adam on 6/24/2016Adam would recommend this product to a friendworks like a champ. just had to get a few mur-lok 1/2' threaded fittings and a couple stem elbows to make it much easier to plumb the two reactors I purchased into my manifold just past the 1/2' gate valves. also the canister color was much darker blue than expected, but it's a reactor and I can still check the media for tumbling.
Good By Nick on 5/10/2016Nick would recommend this product to a friendWorked better than expected; I just wished I paid more attention to the description of the upgraded version.... I thought it was just a nicer color but nope; I have it as an HOB from Display Tank, the extra elbows would have come in handy, soooo, I ended up buying more from BRS
work's great, well made By Inajam on 4/6/2016Inajam would recommend this product to a friendI purchased 2 of these reactors, 1 for GFO and the other for carbon. Came with all the fittings needed. I purchased 2 additional ball valves so once flow is adjusted i don't need to touch them to change media, i just shut off the additional valve i installed before the flow valves.
Works Great By RudyEnt on 3/30/2016RudyEnt would recommend this product to a friendI had one that I use with carbon and GFO and then purchased another one for bio-pellets. They work great. I have not had any issues with either one and they are working perfectly. I like the fact that they can be used for different media. Since I started to use them my water has never looked clearer.