Ask a question
All of the Reeflo pumps are external pumps, they are not submersible.
Below is a link to the head pressure chart. It sounds like this is likely your best bet but the GPH will vary depending on what impeller you have in. With the Barracuda impeller in @ 15ft of head pressure you can expect around 2400gph or so which should be plenty good. If its a bit much you can always turn it down a tad but as a whole, for a pump capable of pumping that type of head pressure pretty good choice.
ReeFlo pumps are hands down the best high flow/high pressure pumps on the market. They are the most affordable, lowest wattage, and quietest pumps in this class. ReeFlo also provides top notch customer service. We have, along with our customers, personally found ReeFlo to be extremely helpful with questions and troubleshooting.
- Max Flow: Barracuda 4590 GPH
- Max Flow: Hammerhead 6000 GPH
- Max Head: 23 Ft
- Dimensions: 16.6" L x 9.6" W x 9.13" H
- Input: 1 ½” FNPT
- Output: 1 ½” FNPT
- Maximum Wattage:253/355W
- Average Wattage: 237/337W
Quick Compare - ReeFlo External Pumps
|Model||Maximum Flow Rate||Maximum Head Pressure||Average Draw||Inlet/Outlet|
|Snapper/Dart Hybrid||2600/3600 GPH||12 Ft||94/165 Watts||2” FPT inlet/1.5” FPT outlet|
|Super Dart/Snapper Gold Hybrid||2400/4300 GPH||14 Ft||147 Watts||2" FPT inlet/1.5" FPT outlet|
|Barracuda/Hammerhead Hybrid||4590/6000 GPH||23 Ft||237/337 Watts||1.5” FPT inlet/outlet|
|Hammerhead/Barracuda Gold Hybrid||4300/6000||24 Ft||237/372 Watts||1.5" FPT inlet/outlet|
|Manta Ray||5040 GPH||55 Ft||771 Watts||1.5” FPT inlet/outlet|
|Tiger Shark||8500 GPH||55 Ft||1065 Watts||1.5” FPT inlet/outlet|
There are no videos related to this product.
Watch out on their seals! By Michael on 9/19/2016Michael wouldn't recommend this product to a friendBeen using this pump in the past 3 years, I bought an extra one just for back up as well. One pump seal failed in 1.5 years, and when I replaced it with my brand new backup, the seal was leaking instantly, and that is a brand new pump! I emailed Reeflo about my failed seals, they tried to avoid a warranty on the seal replacement until I reminded them the backup pump was a brand new unit. So I googled the problem, and apparently this is a common issue with reeflo seals. so I purchased 4 more seals along with their one "warranty" seal.....and guess what? those seals leaked as well!!! Luckily my LFS taught me a trick to silicone the seal to avoid any further leaks, well it worked for a few month, but the seal eventually leaked slowly, and now I'm about to install the Abyzz A400 to replace this junk. those who can afford the price tag on the Abyzz, I suggest you look into this brand, you get what you pay for.
Great pressure By Stevie on 4/5/2016Stevie would recommend this product to a friendMy old pump went bad and had this pump next day aired to my house both pump and shipping was cheaper from BRS and was very helpful matching what I needed. Great pump and plenty of option for more pressure if needed
Powerful, but will leak eventually By Seth on 10/16/2015Seth wouldn't recommend this product to a friendI bought this pump from BRS just about 3 years ago and for the first two and a half years it worked very well at high head pressures, with a minimal amount of noise when installed on rubber mounts. Now the mechanical pump seal is failing and leaking about a gallon of water a day. If you buy this pump make sure you install a drip tray under it! Oh and now because of the seal leak I think some saltwater has gotten into the bearings causing a much louder sound.
Excellent/Efficient Pump By Tharon on 1/23/2015Tharon would recommend this product to a friendI purchased this pump as the work horse for my reef system- two 90 gal tanks with remote sump/refugium. With approx. 10 ft head pressure and 10 ft distance from tanks, this pump handles it with ease. I actually had to dial down the flow using ball valves as the pump was too powerful. Very quiet, very efficient. Highly recommended.
Quiet but seem to be not as strong as the original barracuda By Captain Greg on 1/22/2015Captain Greg would recommend this product to a friendI like the quiet. Head pressure is questionable. Most user don't use the pump to push water through large amount of media like I do. Regular water lifting is good for this pump.
Awesome By mackjr1969 on 11/14/2014mackjr1969 would recommend this product to a friendThis pump is like the description says! Pumps quiet and a beast!
awesome pump By dominick on 11/13/2014dominick would recommend this product to a friendI purchased this pump to run my 220 it is in my basement pump water up about 10ft,plus have it running a.big skimmer,a reactor and still have it dialed down a little bit very little noise highly reccomend this pump for big setups
Very Loud By Michael on 10/29/2014Michael wouldn't recommend this product to a friendI purchased this pump about a month ago and finally got it setup yesterday. It is so loud that I hear it in my living room, even though the pump is in the basement on one of my sumps. Decided to buy another Dart Hybrid instead and sell this one on RC. Not worth it unless the noise isnt an issue.
Excellent flow even with higher head pressure By Jill on 10/5/2014Jill would recommend this product to a friendI installed this pump to return from the basement to the 220 main floor tank. Plenty of flow and quieter than other pumps we have used for the same application. We had no issues swapping impellers. Just make sure you have the right wrenches.
Not so easy By TZ on 4/6/2014TZ would recommend this product to a friendRemoval of the hammerhead impeller & replacement with the Barracuda impeller was impossible. Fortunately Chris at Reflo replaced the entire pump for me. It's not as easy as they might suggest to change impellers. Otherwise, a good pump.
Works great. By Sammy on 3/13/2014Sammy would recommend this product to a friendI've been running this pump for 2yrs on my setup. Relatively quiet, though not super quiet. Plenty of flow though!
Very Nice Pump By Bill on 3/8/2014Bill would recommend this product to a friendI have installed this pump to supply a header unit to feed my systems - replacing several smaller pumps. Works great and reduced energy use.