Ask a question
CO2 Solenoid Diaphragm Valve
Includes flow regulator, needle valve, electronic solenoid & bubble counter. Unit comes with dual gauges each with dual reading of both psi & kg/cm. Left gauge meters tank capacity and right gauge meters flow. Needle valve flow control provides for precise measurement.
The solenoid valve comes with a 1.5 meter power cord. (CO2 bottle is not included)
This regulator is best if used with the Milwaukee SMS122 pH Controller.
There are no videos related to this product.
would advise not to buy By Jim P on 7/15/2016Jim P wouldn't recommend this product to a friendSo like everyone else the tuning of the bubble rate was impossible but I just kept tinkering with it ( I love a challenge). Well at 1:30 this morning we were awakened by a horrible noise. When I went to my tank the CO2 canister was blowing CO2 (under high pressure) into the room. I closed the tank's valve and worked on venting the room. Upon inspecting the regulator the stem going into the gauge assembly had broken off. The actual wall of the stem is just over 1/16" even though it looks sturdy. It took 10min. to drop the pH 2.5, now I get to deal with the results.
Would not shut off By Steve on 6/4/2016Steve wouldn't recommend this product to a friendIt would not shut off. Soleniod valve was defective from the first day of operation. not happy with this product or the customer service from Milwaukee at all. I am throwing it out and spending the money on a quality product.
Its good on a budget By sjdragonslayer on 12/18/2015sjdragonslayer would recommend this product to a friendI purchased this regulator in a time crunch due to my old one failing on me. I intended to use it on my calcium reactor. I think the bad reputation Calcium reactors have compared to part is ther constant need to adjust the regulator. On my apex controller it worked ok, i did find myself tuning almost every other day. So i upgraded to teh plantedaquariums electronic regulator for my Calcium reactor, and this milwaukee on my planted tank. For this planted solution it is set and for get, i think the constant on and off from teh ph controller may have messed with it, not sure. But i would prefer it, the bubble counter is super easy to use and makes and extra piece of equipment go away. Dont forget your check valvue!
Simply a Bad Design By loknar28 on 12/10/2015loknar28 wouldn't recommend this product to a friendI have had this regulator for several years and it has never worked correctly. Like the other reviewers have mentioned it is almost impossible to dial in. It gets clogged and stops flow intermittently. I can't believe BRS still sells this for Milwaukee.
would not recommend By helldiver on 6/27/2015helldiver wouldn't recommend this product to a friendI have been running this unit for over a year and have issues with dirt clogging the CO2 delivery. This is a issue since the CO2 flow will slow down or stop at randon times. Milwaukee knows about this since there are documented instructions on how to bore out the unit to widen the openings, but this is a short term fix.
the left gauge has never worked either was hard to dial in
Not a unit I can trust.
Repeatedly Clogged By Dan on 6/20/2014Dan wouldn't recommend this product to a friendI have been running this unit for over a year and have issues with dirt clogging the CO2 delivery. This is a issue since the CO2 flow will slow down or stop at randon times. Milwaukee knows about this since there are documented instructions on how to bore out the unit to widen the openings, but this is a short term fix. Not a unit I can trust.
Works as advertised.....arrived with bent valve stem By stephen on 3/13/2013stephen would recommend this product to a friendBent stem didn't seem to effect performance
milwaukee warranty is NONE By john hills on 9/24/2012john hills wouldn't recommend this product to a friendbought this regulator, had constant problems with it intermitantly stopping. was told by milwaukee i should drill out the orifice, "there is a video on youtube". turns out these are problem products. DO NOT BUY. john hills washougal, wa.
Nice regulator By Felipe on 5/29/2011Felipe would recommend this product to a friendVery easy to use and I got it working in less than 5 minutes, its made of quality materials! the built-in bubble counter allows even better calibration!! you can go wrong with this unit!