$299.99 As low as: $289.99
Out of stock
$19.99 As low as: $18.99
$59.99 As low as: $56.99
Starting at: $2.49
Great product easy to install. By Kevin on 12/9/13Kevin would recommend this product to a friendGot this for my puratek deluxe ro/di unit somewhat redundant since it has a built in tds meter. But I wanted to see in tds and just a back up exit tds and it works great. Glad to have less than 40 tds from the tap!
Works Well By Cameron on 10/5/13Cameron would recommend this product to a friendI installed this yesterday. Super easy and works great. Definitely good quality. Have not seen the other TDS meters to compare though.
Work good, but needs improvement By Troy on 2/27/13Troy would recommend this product to a friendIt dose what it suppose to. IMO, if you're going to pay alittle extra then the plain duel tds, it should have alittle extra options. One, a back lit display, Two, a 3rd sensor to monitor the tds coming in to the unit would be great. But even though, it still a nice meter.
Worth the extra few bucks... By Frank on 2/19/13Frank would recommend this product to a friendI own both the cheaper dual TDS meter as well as this delux TDS meter. The deluxe is better by far. It has better wiring, a more reliable button to switch TDS leads and a much larger screen. Spend the extra few bucks. It will most likely outlast the cheaper version in my opinion.
I had to buy another I liked it so much By Robert on 10/2/12Robert would recommend this product to a friendI bought the 6 stage RO/DI unit and it came with this TDS meter. Then I like it so much I bought another one so I could monitor the input/output of the carbon block. It well made and works great. You can't go wrong. BRS stands behind all that I buy and are wonderful to deal with.
Simple to use By Eric W on 9/15/12Eric W would recommend this product to a friendGreat little unit for monitoring TDS. Great way to keep track of the DI resin performance.
My only gripe is the LED is WAY brighter than it needs to be, mine is in a dark location and tends to glare so bad it's hard to read the screen. Otherwise, great monitor!
Easy to install, simple to use, and great quality. By Chuck on 8/15/12Chuck would recommend this product to a friendThis TDS meter is great. I purchased this about six months ago from BRS and couldn't be happier. It completely takes the guess work out of when to replace RO filters/membrane and DI resin. I like having the peace of mind knowing the RO/DI is operating perfectly, and knowing exactly when it needs maintenance. Connections to install are all push fittings, and screw-mounting this is definitely the way to go. In all it took about 10 minutes to setup. It'll pay for itself after saving one set of filters and a membrane. I used to replace them all every 6-12 months, but now can know exactly when they need replacement. Thanks BRS for another great reefing tool!
Falsely Advertised By Todd on 7/19/12Todd wouldn't recommend this product to a friendThis absolutely positively does NOT have a water resistant case. I discovered mine would not turn on. Maybe the batteries were dead. Removed the back cover to replace the batteries and discovered corrosion over quite a bit of the solder pads with condensation in the case. There is no seal along the back cover plus there is three holes in the cover for access to the calibration pots. $46 dollars wasted. Get the cheaper one.
A must for your RO system! By Charles on 7/10/12Charles would recommend this product to a friendWorth every penny!
Excellent piece of equipmemnt By Alexa on 5/27/12Alexa would recommend this product to a friendThis device is almost perfect with a few minor issues:
1. the tape doesn't stick well to the wall and I eventually just permanently mounted it with screws after it fell off the wall a few times.
2. The auto-shutoff is way too short.
However, an excellent device otherwise.
Works great By James on 2/24/12James would recommend this product to a friendWorks good, comes calibrated which is great. Ive been useing it in on my bathroom wall and it hadles moisture no problem.
very durable and easy to use. By kevin on 8/2/11kevin would recommend this product to a friendway better quality than I expected for the price
Pressure gauges, flush kits and TDS meters are eas ...
This video demonstrates the different TDS meters a ...
Ask a Question About 'Deluxe Dual Inline TDS Meter DM-2 - HM Digital '
Previously Asked Questions
The DM-2 is an upgrade to the DM-1 TDS Meter:
Upgrade features include:
- Especially designed for commercial/industrial applications.
- Stronger, water-resistant casing.
- Each water line can be individually calibrated.
- Extra large, easy-to-read LCD display.
- Longer, waterproof, shielded cables.
- Variable mounting bracket.
BulkReefSupply.com suggests installing the dual TDS meter post membrane and post DI stage. These two readings will notify you when it's time to change the RO membrane and DI resin. This unit features a digital display and comes with two 1/4" John Guest Quick Connect Tee's. As with all HM-Digital products, the DM-2 comes factory calibrated.
Deal of the Day!
BRS Bulk Kalkwasser Starter PackageEnds in
Regular Price: $54.99
Special Price: $47.9900:00:00:00
- Bulk Media & Additives
- Bulk Reverse Osmosis Filters & Systems
- Bulk Dry Live Rock & Live Sand
- BRS Additives
- Red Sea Additives
- Korallen-Zucht Additives
- Two Little Fishies
- Fauna Marin Aquarium Additives
- Auto Top Off Systems
- Filter Media
- Fish & Coral Foods
- Fragging Supplies
- Heaters & Chillers
- Medications & Pest Removal
- Monitors & Controllers
- Protein Skimmers
- Sumps, Tanks & Refugiums
- Tank Maintenance & Salt Mix
- UV & Ozone
- Videos & Books
- New Products
Send us your feedback
Let us know.
Hours: 9am - 5pm CST M – F
6325 Sandburg Road, Suite 400
Golden Valley, MN 55427 Map
View Larger Map 6325 Sandburg Road, Suite 400, Golden Valley, MN 55427