Ask a question
This kit will come with every item for the ultimate drinking water set up including installation. We cannot sell TDS meter, or Pressure gauges as they are not NSF certified. Feel free to let us know if you have any further questions!
The flush kit will ideally be used before and after each use of the unit. Since Drinking water units are typically always on the flush kit would be one additional step for the owner to flush and forget to turn back off and causes a bit of a head ache. While it does improve the life of the membrane drinking water systems typically are for ease of use and operation. Feel free to let us know if you have any further questions!
it is the same as the individual components however sold at a kit price. Feel free to let us know if you have any further questions!
The Air Gap Faucet requires a 7/8” hole in your counter top or sink bowl. If your sink has a sprayer it is possible that you may be able to remove it and mount the faucet in the same hole. If you need to drill a hole make sure to check for any obstructions underneath the sink and to use the proper tools for the material you are drilling. You will need enough room under the faucet to connect the waste water lines as well as the drinking water line. Consult the instructions for the Air Gap Faucet on the faucet box for specific instructions about installing the faucet and connecting the product water (blue line).
All of our RO/DI systems will use 1/4" tubing and connections.
When used in conjunction with the drinking water storage tank the 150 gpd upgrade kit will not fully perform the waste water will be pressured back to performing as a standard unit would with the added negative of the 150 GPD producing slightly less quality water. Feel free to let us know if you have any further questions!
You can certainly put a solenoid on the input (or product water with the auto shut off valve on our units) This will definitely work well with regular use. Feel free to let us know if you have any further questions!
Is the Aquatec Permeate Pump ERP 1000 compatible with the BRS 5 Stage Drinking Water RO System without any additional parts? If so, where exactly in the system does the ERP 1000 get installed? Does the pump reduce any of the noise produced by the air gap faucet?
Permeate pumps will work well with our units. For easiest install you will run the source water (Red tube) in through the permeate in and out running to the membrane and the Black tube Waste water through the brine in and brine out port. We are not aware of the pump reducing any noise from an air gap faucet unfortunately.
I have include an add on filter and canister you can use to convert your unit.
The BRS 5 Stage RO Drinking Water Reverse Osmosis System includes all the essential features necessary to start making pure RO water for your saltwater tank as well as supply drinking water at 75 gallons per day.
Drinking Water Features:
- 3.2 gallon pressurized water tank
- Silver drinking air gap water faucet
- All necessary drinking water fittings
5 Stages of Filtration:
- Purtrex 5 Micron Depth Sediment Filter
- BRS Chlorine & VOC 5 Micron Carbon Block Filter
- BRS Universal 1 Micron Carbon Block Filter
- 75 GPD Dow Filmtec Membrane
- Omnipure Inline Carbon Block
Parts Bag Includes:
- 3/8" Push Connect drain saddle clamp to plumb the waste water line from the RO system to a sink's drain pipe
- Mur-lok Push Connect Inline Ball Valve for easy on/off
- Filter Wrench to tighten and loosen canisters
- Mur-lok Garden Hose/Utility Sink Adapter to make a non-permanent connection to garden hose or laundry tub
- Mur-lok EZ angle stop adapter to make a semi-permanent connection to household water supply under sink
- 3/8" Black RO tubing
- Automatic shut-off valve
- Mur-lok Push Connect dual EPDM O-Ring fittings
- 10 Ft each of blue, red and black tubing
- BRS 5 Stage Drinking Water System exclusively features NSF-certified Universal and Chlorine/VOC Carbon Block Filters with 30% more carbon than standard blocks, GE Purtrex Depth Sediment Filters, American made DOW membranes and Omnipure filters.
- Dimensions - 16" x 6.25" x 15.5" (RO bracket) / 11.5" diameter x 15" tall (storage tank)
Pleasantly surprised... By franksreefs on 8/24/2016franksreefs would recommend this product to a friendThis is my first purchase of an RO system. I purchased it for drinking water at this time with the intent to use it for a reef tank in the near future (I'll have to purchase the DI cartridge then). Set-up was a breeze and the unit works great!
Great product.... looking good By CI CI wang on 5/21/2016CI CI wang would recommend this product to a friendI was buy a stage r o drinking water system fro BRS ...and this product was great ..and make sure you need to get a booster pump and the permeate pump ...because I have two pump and up grade to a 15 gallon water tank. be sure u needs a check value and a inline dual TDS meter... with a pressure gauges... finally BRS make great product and customers service is great... high recommend.
Very Pleased with the System By Scott on 2/18/2016Scott would recommend this product to a friendFound the installation to be fairly simple, took about an hour and a half to accomplish. I use the system for my reef tank and for drinking. Water tastes great and works as advertised with the reef tank.
Good water filter By San Francisco Marin Country on 2/14/2016San Francisco Marin Country would recommend this product to a friendthis is lady ...i ask one of my friend to buy a ro water drinking filter and he did come and install it for me under my kitchen sink...and this water filter was great but don't for get u need to buy a permeante pump in other to have good pressure..and pressure gauge to see water incoming pressure.and a good in line TDS meter ...and also a check value...i think this filter is super ....also cooking with soups and drink...the best .....good
Great Prouduct By Jenny Chen on 2/14/2016Jenny Chen would recommend this product to a friendI jenny was bought one of the Ro drinking water system ...great product ...and i did up grade
a EPR 1000 permeante pump and 2 pressure gauge and a inline TDS meter and i did change my flow restrictor .......and this water was great for cooking and drinking ....also now my baby is 3 month and she drinks this water alot than before ....great product...
Good Product of Ro drinking water system By chan on 12/5/2015chan would recommend this product to a friendI bought my ro drinking water system on the black Friday. that was easy to install...and i did install a permeante pump with a pressure gauge..also with a tds inline meter. ........that was a great prouduct.....like it so much..............
RO Drink water 75 Gallon A Day By peter li on 9/10/2015peter li would recommend this product to a friendI peter was install RO 75 gallon a day drinkink water system . and it was easy to install but u need to buy a EPR 1000 permeante pump to get the water filll up faster...and it talk about 50 mins to fill up the tank...but EPR 1000 is little noise but great pressure ...and i did install a pressure gauge and and TDS meter...and it work great .......i think that is the best filter i have so far.. great.
i have still own it By jack lee on 9/7/2015jack lee would recommend this product to a friendthis filter is very good for drinking water system and i did add a EPR 1000 permeant pump and it fill up the tank with good pressure and when i need water it fast and clean .......
Love this system By DNL on 7/7/2015DNL would recommend this product to a friendEasy to install. Works great. Provides enough drinking water for household of 4. We have been using this system for the past eight months. No complaints.
Great product. Does what it's meant to do. By Trey on 6/3/2015Trey would recommend this product to a friendI plumbed it under my sink and replaced the soap pump with the faucet. The water tastes good just be sure to follow instructions and clear the system first. It was very clear on how to hook everything up and I had no leaks after installing everything. Great product.