- Home /
- Aqua Illumination Sol LED Mounting Rails
39 Reward Points$39.99
Not readily compatible with hydra 52 By Matt on 9/30/2014Matt would recommend this product to a friendSo when I went to slide the lights into the rails the screws had no happy medium, either they were too loose or too tight.( the light would move freely and not sit straight or too tight and it would not slide into position at all) Being a DIY guy I figured out that if I used a 2" long screw with a nut and washer backed up to both the rail and the hydra it works fine. There is a 1" gap between the hydra and the rail system but this method allows you to freely slide the light into position and lock it into place. It was a pain to find all the hardware because it is all metric, had to go to 2 hardware stores. If I remember correctly it was a #8 bolt x 2" long. You need 2 of these per hydra 52. Then you need 4 nuts, 2 tiny washers and 4 fender washers.
I used a tiny washer on the head of the bolt to keep it snug, up in the rail. If you can find a pan head bolt that won't fall through the rail slot, these are not necessary. However I could not.
1.) First you need to figure out your light spacing.
2.) Next you put on two washers; one tiny and 1 fender style, a nut, another nut, and a fender washer onto a bolt.
3.) Next you will thread the bolt into the hydra until it bottoms out. ( I used a tape measure to make sure they were all threaded in evenly because this will make certain your lights are even when they are mounted next to each other.
4.) Next you tighten down the bottom nut and washer tight to the hydra 52.
5.) Next you slide the bolt head and tiny washer into the rail slide notch on both sides. Once you have the hydra 52 into position you then tighten the nut and washer up against the rail on both sides.
I am very happy with how it looks but it took a few hours to get it to my satisfaction. If it's going to hang above my tank it has to look nice!
In my opinion a 70$ light rail should be plug and play. This is why only 2 stars. Also if you plan on using the mounting legs they wouldn't fit over the bracing on my tank...FYI.
I hope this review will help others with their install.
Not for Hydra 52's By Ken on 9/1/2014Ken wouldn't recommend this product to a friendI jpurchased these for my Hydra 52's and they wouldn't work at all. I finally "rigged" them so they would hold the lights.
simple By hans24hrs on 2/13/2014hans24hrs would recommend this product to a friendThe rail system was easy to put together and very light weight. Only thing I would change is the end caps seemed a little flimsy, could have used a stronger/thicker plastic or metal.
Good Quality Product By Jim on 7/9/2013Jim would recommend this product to a friendI had purchased (3) Aqua Illumination Hydra LED Modules for my 150 gallon reef tank. The mounting rails are high quality aluminum, the ends are plastic, but durable. The reason I only give it 4 stars is, I already payed out $1200 for the lights and another $65 for the(48") rail system. Then I needed to order the hanging kit to install it all. I think for the money, the rail system should include the hanging kit. Just make sure you don't purchase the wrong kit. I ordered the EXT Kit instead of the Rail Mounting Kit. But I would recommend this product.
There are no videos related to this product.
Previously Asked Questions
The mounting rail is what makes the AI Sol a lighting system. The rails can easily be sized for your specific tank, and once placed you may move the modules as you wish about the tank. Change heights easily with the locking slider. These rails can be used with the AI Vega, which requires #10-32 Screws not exceeding 1" (Sold Separately)
Deal of the Day!
Aquabreed 200 Calcium & Alkalinity DripperEnds in
Regular Price: $16.99
Special Price: $12.7400:00:00:00
- Bulk Media & Additives
- Bulk Reverse Osmosis Filters & Systems
- Bulk Dry Live Rock & Live Sand
- Auto Top Off Systems
- Calcium, Alkalinity & Trace Elements
- Controllers, Monitors & Testing
- Filter Media
- Fish & Coral Foods
- Fragging Supplies
- Heaters & Chillers
- Pumps & Plumbing
- Salt Mix & Tank Maintenance
Skimmers & Reactors
- Internal Protein Skimmers
- External Protein Skimmers
- Hang On Skimmers
- Ozone Equipment
- Nano Skimmers & Accessories
- UV Sterilizers
- Sumps, Tanks & Refugiums
- Specials, New & BRS Gear
Send us your feedback
Let us know.
Phone Hours: 7am - 7pm CST M-Th
10am-4pm CST Friday
6325 Sandburg Road, Suite 400
Golden Valley, MN 55427 Map
View Larger Map 6325 Sandburg Road, Suite 400, Golden Valley, MN 55427